1x5 HDMI Splitter over IP UTP by Cat5e RJ45 1080p HDMI 1x5 Splitter HDMI Extender 120m Lan Splitter

        

US $299.99 Original Price : US $299.99 (0%)  

Limited Price 1x5 HDMI Splitter over IP UTP by Cat5e RJ45 1080p HDMI 1x5 Splitter HDMI Extender 120m Lan Splitter with FREE Shipping Worldwide!

 4.66

Buy on AliExpress

Related Products :

HDMI Splitter 1x4 1080P HDMI Extender 1 TX to 4 RX over Network RJ45 Cat5e/6 LAN TCP IP Ethernet Splitter Extender HDMI For Xbox

HDMI IR Extender Transmitter Receiverr over HDMI with 3.5mm Jack HDMI Audio Extractor over Lan UTP TCP IP by RJ45 Cat5e HDMI IR

1x5 HDMI over IP Extender 1 Sender 5 Receiver via Cat5e Cat6 HDMI Transmitter Cat5 to UTP LAN Rj45 Ethernet TCP IP splitter

HDMI POE Extender 100m with 3.5 MM Jack Audio Extractor HDMI over UTP TCP Network by Cat5 Cat5e rj45 Cat6 POE Extender 100m RJ45

Product description

[32870172991]

1x5 HDMI Splitter over IP UTP by Cat5e RJ45 1080p HDMI 1x5 Splitter HDMI Extender 120m Lan Splitter 1 Sender to 5 Receiver TX RX
!!!This product supports 1pcs of SENDER support maximum 253pcs of RECEIVER (over Swtich).
Introduction:
This 1x5 hdmi splitter extender is designed to convert HDMI signal to standard TCP/IP and transimit by internet cable or Lan.With the advantage of TCP/IP standard,it can transmit HDMI signal source from HD STB,DVD,Sky HDbox,HDMI display card etc to HD projector, DLP,LCD,LED and other audio visual equipments.
Features:
Auto Adjustment to Match Cable Length
Adjust the specifications automatically for different cable length 1-160m (10m 20m 30m 40m 50m 60m 70m 80m 90m 100m 110m 120m 130m 140m 150m 160m) to achieve the best display
1. Apply M-JPEG technology to process image compressing. The loss of image quality is verysmall;480i@50Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz,1080i@50/60Hz,1080p@50/60Hz1080p@24Hz .
2. Supported HDMI format: 480i@50Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz 1080p@24Hz
3. HDCP compatible.
4. It can transmit HDMI 1080P signal to above 120m by using UTP Cat5e/6.
5. It can transmit by Lan.
6. Support Lan bandwidth: 100M
7. Extend 120m longer by adding one more ethernet router
8.The data could betransmitted over switch, router and other ethernet device, and extend the transfer distance to over 20km.
9.It also could work in broadcast mode, like HDMI splitter, broadcast HDMI signal from1pcs of SENDERsupport maximum 253pcs of RECEIVER (over Switch)
Layout：
HDMI In: Connect your HDMI source here with an HDMIcable (cable not included)
Power Jack: onnect the included 5V DC power adapterhere
Reset: Press to reset if HDMI Extender doesn't workproperly
RJ45: Link to the Receiver's RJ45 via a Cat5/5e/6 cable
HDMI Out: Connect to your HDMI display here with anHDMI cable (cable not included)
Reset: Press to reset if HDMI Extender doesn't work properl
Application：
1.HDMI Extender Point to Point :signals up to 120 metersover one CAT5/5e/6 cable
2. HDMI Splitter 1x2: Extend and split using network router/switch.
- 1 Transmitter (TX) to 2 Receivers(RX)

3.HDMI Splitter: 1 (TX) Transmitter to 3 (RX) Receivers.

4.HDMI Splitter 1x4 : 1 (TX)Transmitter to 4 (RX) Receivers
5.HDMI Splitter 1x5 : 1 (TX)Transmitter to 5 (RX) Receivers.
6.Cascade: Unlimited extension with network router or repeater.
Extending HDMI signal one by one.It’s maximum distance is 20Km.
Customer could combine Cascade Mode and Splitter mode to setup complex HDMI transmission network for big projects.
Specifications:
Harware Installation：
Note: To achieve optimal performance, a CAT6 cable isrecommended.
1. Power off all devices including your HDMI source anddisplay.
2. Connect your HDMI source to the Transmitter's HDMIIN connector.
3. Connect your HDMI display to the Receiver's HDMI OUTconnector with an HDMI cable (not included).
4. Connect and link the Transmitter and Receiver by aCAT5/5e/6 cable.
5. Plug the included power adapters into the Transmitter'sand Receiver's Power Jacks, then plug both poweradapters into reliable power outlets.
6. Power on your HDMI device and HDMI display.
7. The HDMI Extender is ready for use
FAQ&Solution：
Q: The TV displays "Waiting for connection..." on thebottom-right corner:
A: 1) Check whether the power adapter of Transmitter (TX),Receiver (RX) or Network Switch (if used) is connected.
2) Make sure the Network cable (CAT5/5e/6) is firmlyconnected between TX and RX.
Q: The TV displays "Searching TX ":
A: 1) Make sure the HDMI device is connected to theTransmitter (TX).
2) Use other HDMI cables to connect.
3) If still doesn't work, connect the HDMI device to theTV directly to see if there's a signal.
Q: The HDMI extender isn't working properly:
A: 1) Please check the cable lengths are within below:
- HDMI cables: 2m
- Network cable (CAT5/5e/6): 120m
2) Press the "Reset" button on the TX/RX and reconnect.